You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)
  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)
  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required
  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact webmaster@ide.mdh.se

LEAN SPEED OPTIMIZATION APPLIED TO A CYCLIC HAUL OPERATION

Fulltext:


Publication Type:

Conference/Workshop Paper

Venue:

World Mining Congress 2016


Abstract

Cyclic haul operations are iterative transport operations, often performed by several haulers in a production work step. Cyclic haul operations are common in mining and quarry operations where the purpose of the haul work step is to move mass a relatively short distance e.g., from blasted rock supplies to the mass crushing and separation facility. The operation can include one or several haulers that perform the work simultaneously. When several haulers are used, they are generally not synchronized in an optimized way and operative variations and changes continuously affects the operation. An example of such variations can be that the driving speed and time required for certain maneuvers varies depending on driver skills and machine capacity. An operative change can be that the loading position is moved, leading to changed routes and varying distances. The operative characteristics of the haul work step indicates that there rarely exists a static state that the operators can learn to do efficiently. Our previous research has shown that haul operations can have a fuel reduction potential of up to 40%, depending on the operation characteristics and wastes such as unnecessary stops and waiting. This paper presents and assesses a system solution in a decentralized control system that calculates and advices operators with a speed for just in time arrival to a destination. The purpose of the system is to reduce fuel consumption with an obtained production rate. The system assessment shows that while production rate is obtained, fuel is reduced by up to 20% compared to base line operation in a simple quarry haul work step, including three haulers.

Bibtex

@inproceedings{Rylander 4947,
author = {David Rylander and Jakob Fryk and Peter Wallin and Jakob Axelsson},
title = {LEAN SPEED OPTIMIZATION APPLIED TO A CYCLIC HAUL OPERATION},
month = {October},
year = {2016},
booktitle = {World Mining Congress 2016},
url = {http://www.es.mdh.se/publications/4947-}
}