About SAFECOMP 2018

Since it was established in 1979 by the European Workshop on Industrial Computer Systems, Technical Committee 7 on Reliability, Safety and Security (EWICS TC7), SAFECOMP has contributed to the progress of the state-of-the-art in dependable application of computers in safety-related and safety-critical systems.

SAFECOMP is an annual event covering the state-of-the-art, experience and new trends in the areas of safety, security and reliability of critical computer applications.

SAFECOMP provides ample opportunity to exchange insights and experience on emerging methods, approaches and practical solutions. It is a single track conference without parallel sessions, allowing easy networking.

Latest News

  • SAFECOMP2018 USB key content available for download: read more
  • ASSURE 2018 presentations available for downlaod: read more
  • SAFECOMP 2019 website available: read more
  • Best paper award announced: read more
  • SAFECOMP 2018 panel speakers: read more
  • FREE proceedings access until October 16, 2018: read more
  • Final program available: Download pdf

Important Dates

  • Workshop proposal submission: 5 February 2018
  • Full paper submission: 28 February 2018
    Deadline extension: Monday, March 12th (AoE)
  • Notification of acceptance: 7 May 2018
  • Camera-ready submission: 11 June 2018
  • Workshops: 18 September 2018
  • Conference: 19-21 September 2018

September 18

Aros Congress Center
Västerås, Sweden


Keynote speakers

Keynote Speakers

Robyn Lutz


Robyn Lutz is a professor of computer science at Iowa State University. She was also on the technical staff of Jet Propulsion Laboratory, California Institute of Technology, from 1983 to 2012, most recently in the Software System Engineering group. Her research interests include safety-critical software systems, product lines, and the specification and verification of molecular programmed nanosystems. She is an ACM Distinguished Scientist. She was program chair of the International Requirements Engineering Conference in 2014, general chair in 2006, and currently serves on its steering committee. She has served two terms as an associate editor of IEEE Transactions on Software Engineering and on the editorial boards of the Journal of Software Testing, Verification and Reliability, the Journal on Software and System Modeling, and the Requirements Engineering Journal.

Keynote title: Software Engineering for Safety in Molecular Programmed Systems

Abstract. Molecular programming uses the computational power of DNA and other biomolecules to create nanoscale systems. Many of these envisioned nano-systems are safety-critical, such as diagnostic biosensors that detect contaminants, drug capsules that dispense medicine when they encounter diseased cells, and configurable nano-robots. Challenges to the safety engineering of the nano-systems include their probabilistic behavior, their very small size, the very large number of them that execute at once, and the dynamic environment in which they operate. Designs need to assure safe outcomes from highly fault-prone devices, hampered by the difficulty of defining the limits of their safe operation.

I organize the talk around our interdisciplinary team’s development of an essential safety building block for programmed molecular systems– an embeddable, reusable, molecular Runtime Fault Detector. I describe how we harnessed goal-oriented requirements and risk analyses, reaction network modeling, and probabilistic model checking to specify, analyze, and verify the safety requirements and design for this new nano-system. Finally, I suggest that a similar approach also may be helpful in the safety engineering of non-molecular systems composed of highly distributed, autonomous, fault-prone components operating in dynamic environments.

Uma Ferrell


Uma Ferrell is excited for the opportunity to share her experiences in engineering systems using cross domain and intra domain knowledge. Her perspectives have benefited from continuous learning through authoring standards, teaching, and researching as well as working with different cultures, and in different domains. Uma is a software and airborne electronic hardware Designated Engineering Representative (DER) for the US Federal Aviation Administration. She is a certification subject matter expert at the MITRE Corporation working on the US Federal Aviation Administration’s certification transformation, and Global Positioning System (GPS) navigation for aviation. In addition, she is working on innovative methods of certification for the artificial intelligence in Urban Air Mobility systems, and codification of small Unmanned Aircraft Systems Type Certification. She is also devising a proof-of-concept for an integrated safety and cybersecurity analysis in complex software systems. Uma started her career building mission critical systems for space. After working in technical leadership positions for different companies, Uma co-founded Ferrell and Associates Consulting, Inc. a certification and aviation safety consultancy where she worked as a Chief Executive Officer and a principal for 17 years. Uma holds a Master’s degree in Electrical Engineering from Johns Hopkins University, a Master’s degree in Solid State Physics, BSc (Hons) in Physics, BSc (Physics, Chemistry and Mathematics) from Bangalore University. Uma is one of the technical editors for the third edition of the Digital Avionics Handbook, published in 2014 by CRC Press. Uma is also on the editorial board of American Society for Quality (ASQ) Software Quality Professional Journal. She also reviews technical books for ASQ. When she is not preoccupied with thoughts on safety culture, new technology, certification, and standards, Uma loves to play Indian classical music.

Keynote title: Reviews?! We do that! Cross-domain reuse of engineering knowledge and evidence

Abstract. Both industry and certification authorities have reason to be excited about the benefits and opportunities of reusing and building products for more than one domain such as aviation and automobiles. Cross-domain reuse in an increasingly complex world can inject novel technologies to conventional domains to increase safety. Such opportunities come with social and ethical responsibilities for the safe use of a product in the target environment, not just whether the product and evidence are acceptable to certification authorities. The evidence may be wrongly presented based only on the equivalency in the use of expected language in pertinent standards. The evidence should be based on the actual accomplishments met and whether those accomplishments are applicable towards design assurance and safety in the target domain and environment.

Cross-domain reuse has many considerations. This talk is focused only on safety and security. Obviously, consideration of reuse must include functionality, use of standards in that domain, and certification concerns. All these considerations have undercurrents of safety as well as security. Let us focus further on three topics:

  • Derivation of risk: Derivation of risk depends on the target domain and the human/system use of the product. Also, the acceptable level of risk tolerance is inherently different in different domains. Aviation is one of the few domains where safety risk tolerance is codified. As stewards of safety in this society, we need to be aware of the real idea behind certification, and promulgate a safety culture to take responsibility for safe cross-domain use of the product throughout the product life
  • Appropriate use of evidence: While acceptability for certification is important, the knowledge and evidence for why a product is acceptable is even more important. Evidence may have been produced in a previous domain that appears to be usable in a target domain. Only the basis for that evidence may have a different interpretation and implication in the target domain because the terminology for even simple terms such as “reviews” may not have the same meaning in different domains. Further, the same functionality may be used in diverse ways in the two domains
  • Importance of systems engineering: There are certainly considerations that may be codified and delegated to checklists. But blind use of checklists makes a poor substitute for domain knowledge and engineering. Cross-domain use does not just mean that one could deploy a product. Continued safe use of the product in the target domain has specific implications for maintenance of the product as well as maintenance of the system of which the product is just one component. For example, an electro-mechanical system may need adjustments to maintenance cycles depending on the characteristics of the component commanding the mechanical actions. In general, we must make sure that component engineering is within the context of system safety and security.

Opportunities of cross-domain reuse indeed come with responsibilities to understand, analyze, and engineer the product. Appropriate reuse considered in the system context can be a powerful tool to introduce newer technologies to solve complex problems.

Richard Hendeberg


Richard Hendeberg works as a specialist in functional safety at Epiroc Rock Drills AB. He holds a master of science in electronics from the University of Örebro. Richard has worked with design and development of both machinery and systems, including radio- and tele-remote control system and autonomous Load Haul Dump machines. In his current role, Richard supports all divisions within Epiroc Rock Drills AB with matters regarding product legislation, international and regional standards and safety of machinery. He develops strategies and processes for safety management as well as methodologies and tools for risk assessment, design and evaluation of safety functions. Richard holds certifications as machinery safety expert from both the Swedish standards institute and TÜV Nord. He participates as expert in relevant ISO and CEN technical committees for autonomous machinery and safety of control systems.

Keynote title: Experiences from the industry, design and application of a control system platform for safety of machinery.

Abstract. Epiroc Rock Drills AB is a global manufacturer of mining and construction machinery. These highly automated machines operates in an incredibly harsh environment where reliability and availability is paramount. In this presentation, Richard Hendeberg – Specialist functional safety, talks about Epiroc’s control systems platform and work with safety of machinery. How a modular design, componentization of software and standardization on hardware modules has led to an efficient reuse of engineering efforts and an automation platform which is used throughout Epiroc’s entire range of machinery. In his presentation, Richard also describes Epiroc’s journey with safety of control systems, leading up to the integration of safety functions into the existing control system platform. The challenges of designing safety functions for a harsh environment and why availability of the machine might be as important for the safety of the operator as the reliability of the safety function.

SAFECOMP 2018 Partners

Custom Sponsors
Silver Sponsors
Bronze Sponsors